SDShare - SD Video Encoder and DVB-T Modulator

SDShare DVB-T SD Modulator

CVBS
SD INPUT

YPbPr
SD INPUT

S-VIDEO
SD INPUT

MPEG-2 ENCODER
DVB-T Modulator

Remote Control
IR Extender*

web
set-up

*IR target and IR emitter accessories sold separately.
SDShare SD DVB-T modulator
SDShare SD digital TV home distribution

Digital Multimedia distribution within your home or multi-storey building

576i, 480p, or 480i SD video and audio is sent and distributed through your home RF coaxial network to all TV sets in your home or Multi-storey Buildings, University Campus, Healthcare, Hospitality, Military installations, Digital Signage, etc.
SDShare RF output signal is easily combined with off-air digital TV programs.

Typical applications:

  • Watch satellite TV programs in each home TV set, using a single receiver.
  • Watch SD films from your multimedia player in any or all your TV sets.
  • Place that noisy Home Theatre PC in another room, and enjoy true silence in your preferred sofa.

With a high quality modulator and MER better than 38 dB, the SDShare ensures no signal drop, not only in the most demanding in-house installations but also in MATV/CATV installations.

The signal is combined with the off-air digital TV antenna signal and distributed using the same coaxial cables which already reach each of your home TVs.
No additional cabling is required.

*All specifications are subject to change without notice
Video Inputs (Sorted by Priority)
Components YPbPr. 3x RCA female
Composite CVBS. 1x RCA female
S-Video S-Video. 1x mini-DIN
Video Format PAL or NTSC
Encoder MPEG-2
Adjustments Brightness, Contrast, Saturation, Hue, and Sharpness.
Aspect Ratio 4.3 or 16:9
Resolutions SD: 576i, 480p, 480i
Latency time Typically: 1200ms end to end (delay from video input and demodulated video output on a TV)
Audio
Encoder MPEG1 Layer II
NIT
Edit

Prog. Name
tick

Prog. Number
tick

LCN
tick

Network Name
tick

Network ID
tick

Orig. Net. ID
tick

Prov. Name
tick

Cell ID
tick

TS ID
tick

RF Modulator
Standard COFDM DVB-T EN 300 744
FFT mode 2K or 8K
Bandwidth 7MHz, or 8MHz
Constellation 16QAM or 64QAM
Guard Intervall 1/4, 1/8, 1/16, or 1/32
FEC 3/4, 5/6, or 7/8
M.E.R. ≥38dB
Frequency 175.5 to 858MHz (Channels table)
Channels E5 to E69 (Including S11 toS41)
RF Output
Output Level Typ. 85 dBµV
Output Level Adjustment 0 to -20dB
Connector "F" female
Set-Up
Locally Built-in front keyboard and LCD display
Web Set-Up Remote and easy programming and monitoring using Chrome, Firefox, IE9+, Opera, Safari, etc.
Password protection Yes. For front panel and web set-up.
Remote Control IR Return path
Compatible with koovik IR target and IR emitter (not included).
Power Supply
Type Switch mode. Separate module.
Input Voltage Universal : 100 to 240VAC 50/60Hz
Output 12VDC, 1.5 Amp max. Typ. modulator current consumption : 0.4 Amp
Dimensions (when plugged) 80x50x32mm (WxHxD)
General
Dimensions Modulator: 235x145x35mm (WxHxD)
Packing box: 370x180x60mm (WxHxD)
Weight Net: 0.9 Kgs, Gross: 1.3 Kgs
Temperature Operating: 0 to 45°C up to 90% humidity
Included 1 x Power Supply
Note Silent operation. Fan-less
koovik SD digital modulator web set-up

Multilingual web Set-up

Embedded web server set and monitor (on site or remotely) all the modulator parameters and configuration. Automatic IP address using DHCP.

It is possible to save all configuration parameters in your computer for later use in other modulators.

*You can also adjust the settings using the front panel keyboard and display.